The current research investigated a process combining leaching, purification and membrane electrodeposition to recover tin from the metal components of WPCBs. Experimental results showed that with a solid liquid ratio of 1:4, applying 1.1 times of stoichiometric SnC14 dosage and HC1 concentration of 3.5-4.0 mol/L at a temperature of 60-90 degrees C, 99% of tin can be leached from the metal components of WPCBs. The suitable purification conditions were obtained in the temperature range of 30-45 degrees C with the addition of 1.3-1.4 times of the stoichiometric quantity of tin metal and stirring for a period of 1-2 h; followed by adding 1.3 times of the stoichiometric quantity of Na2S for sulfide precipitation about 20-30 min at room temperature. The purified solution was subjected to membrane electrowinning for tin electrodeposition. Under the condition of catholyte Sn2+ 60 g/L, HCl 3 mol/L and NaCl 20 g/L, current density 200 A/m(2) and temperature 35 degrees C, a compact and smooth cathode tin layer can be obtained. The obtained cathode tin purity exceeded 99% and the electric consumption was less than 1200 kW h/t. The resultant SnCl4 solution generated in anode compartment can be reused as leaching agent for leaching tin again. (C) 2015 Elsevier B.V. All rights reserved.