The zero-valent iron permeable reactive barrier (ZVI-PRB) is a promising technology for in-situ groundwater remediation. However, its long-term performance often declined due to the blocked reactive sites by corrosion products and by interference of co-existing solutes. In order to address these issues, a pillared bentonite (Al-bent) was homogeneously mixed with ZVI for removing selenate (Se(VI)) from simulated groundwater in column experiments. The Se(VI) removal was enhanced because first Al-bent could facilitate the mass transfer of Se(VI) from solution to iron surface and accelerate Se(VI) reduction. XANES analysis indicated that Se(VI) was almost completely reduced to Se(0) and Se(-II) of less toxicity and solubility by the ZVI/Al-bent mixture, and the buffering effect of Al-bent could maintain the pH at a lower level that favored the Se(VI) removal. Besides, Al-bent could transfer the corrosion products away from iron surface, leading to the enhanced reactivity and longevity of ZVI. The inhibition on reactivity towards Se(VI) in both the single ZVI and the ZVI/Al-bent systems increased in the order of Cl-

Keywords:Pillared bentonite;Zero-valent iron;Selenate;Removal;Co-existing solutes