Novel spinel copper cobaltate (CuCo2O4)/graphitic carbon nitride (g-C3N4) (named C-CuCO2O4) nanohybrids with different weight ratios of g-C3N4 to CuCo2O4 were successfully synthesized via a facile hydrothermal method. Then the nanohybrids were added into the thermoplastic polyurethane (TPU) matrix to prepare TPU nanocomposites using a master batch-melt compounding approach. Morphological analysis indicated that CuCo2O4 nanoparticles were uniformly distributed on g-C3N4 nanosheets. Thermal analysis revealed that C-CuCo2O4-7 (proportion of g-C3N4 to CuCo2O4 of 93/7) was an optimal nanohybrid for the properties improvement of TPU. Incorporation of C-CuCo2O4-7 into TPU led to significant improvements in the onset decomposition temperature, temperature at maximal mass loss rate and char yields. The heat release rate and total heat release of TPU/C-CuCo2O4-7 decreased by 37% and 31.3%, respectively, compared with those of pure TPU. Furthermore, the amounts of pyrolysis gaseous products, including combustible volatiles and carbon monoxide (CO), were remarkably reduced, whereas, non-flammable gas (carbon dioxide) increased. Excellent dispersion of C-CuCo2O4-7 in TPU host was achieved, due to the synergistic effect between g-C3N4 and CuCo2O4. Enhancements in the thermal stability and flame retardancy were attributed to the explanations that g-C3N4 nanosheets showed the physical barrier effect and catalytic nitrogen monoxide (NO) decomposition, and that CuCo2O4 catalyzes the reaction of CO with NO and increased char residues. (C) 2015 Published by Elsevier B.V.