A methodology is presented to evaluate the explosion hazard of typical bag and cartridge dust collectors. The evaluation accounts for the expected development of suspended dust concentrations greater than the dust MEC during the normal pulsing of the bags or cartridges to remove part of the attached dust. Equations are presented to calculate these concentrations and also the associated partial volume explosion pressures resulting from the ignition of these dust clouds. Five quantitative examples are presented. The methodology also includes considerations of potential upset condition full volume explosions associated with the detachment of about half the dust on the bags or cartridges. A flow chart is offered to implement this hazard evaluation method for special situations in which the need for dust explosion protection may not be obvious. (C) 2015 Elsevier Ltd. All rights reserved.