Journal of Colloid and Interface Science, Vol.456, 166-173, 2015
Preparation and characterization of VO2(M)-SnO2 thermochromic films for application as energy-saving smart coatings
Novel VO2(M)/SnO2 heterostructured nanorods are prepared by combining the conventional hydrothermal synthesis method and post annealing process. The results reveal that the nanosized SnO2 particles are not only successfully grown on the surface of the VO2 nanorods but also uniformly distribute on VO2 without aggregation. The existence of the SnO2 nanoparticles inhibits the aggregation during the annealing process and widens the band gap of the VO2 crystals from 0.75 to 1.7 eV. The two aspects can both improve the optical properties of the VO2(M)/SnO2 composite film. The visible transmittance is up to 35.7% and the OR modulation at 2500 nm is more than 56%, which were much higher than the pure VO2(M) film. In addition, the SnO2 layer could reduce the width of the hysteresis from 17.8 to 10.7 degrees C caused by Sn-doping and enhance the sensitivity. We believe that the VO2(M)/SnO2 heterostructured coating is a good candidate for smart windows. (C) 2015 Elsevier Inc. All rights reserved.
Keywords:Vanadium dioxide;Hydrothermal treatment;Semiconductor-metal transition;Nanorods;VO2-SnO2 heterostructures;Thermochromic properties