During the production of therapeutic monoclonal antibodies (mAbs), not only enhancement of niAb productivity but also control of quality attributes is critical. Charge variants, which are among the most important quality attributes, can substantially affect the in vitro and in vivo properties of mAbs. During process development for the production of mAbs in a Chinese hamster ovary cell line, we have observed that an improvement in inAb titer is accompanied by an increase in the content of acidic charge variants. Here, to help maintain comparability among mAbs, we aimed to identify the process parameters that controlled the content of acidic charge variants. First, we used a Plackett-Burman design to identify the effect of selected process parameters on the acidic charge variant content. Eight process parameters were selected by using a failure modes and effects analysis. Among these, temperature shift was identified from the Plackett-Burman design as the factor most influencing the acidic charge variant content. We then investigated in more detail the effects of shift temperature and temperature shift timing on this content. The content decreased with a shift to a lower temperature and with earlier timing of this temperature shift. Our observations suggest that Plackett-Burman designs are advantageous for preliminary screening of bioprocess parameters. We report here for the first time that temperature downshift is beneficial for effective control of the acidic peak variant content. (C) 2014, The Society for Biotechnology, Japan. All rights reserved.