Light and transmission electron microscopy techniques have been applied in observations of hypervelocity impact craters in two different copper targets : a 38 mu m grain size mill-processed target, and a 763 mu m grain size annealed target, the smaller grained target being impacted with a 1100 aluminium sphere and the larger grained target being impacted with a soda-lime glass sphere, at velocities near 6 km s(-1). Both target craters exhibited dynamic recrystallization near the crater wall. The jetting associated with these two craters was very different. Considerably more plastic flow and a larger rim characterized the larger grained target. No significant melt-related phenomena were observed either near the crater wall or in the jetted rim for either crater. Consequently, the principal features of crater formation involve extreme plastic flow in the solid state. Microbands were observed to occur profusely in a zone below the smaller grained mill-processed target crater while more profuse and extremely long, unidirectional bundles of microbands (which were coincident with traces of {111} planes) occurred below the annealed larger grained target crater. These observations attest to the dominant and unique role played by deformation microbands in cratering in copper, because essentially no deformation twins were observed in either target.