- Previous Article
- Next Article
- Table of Contents
Fluid Phase Equilibria, Vol.395, 1-8, 2015
Vapour-liquid equilibrium at T=308.15 K for binary systems: Dibromomethane plus n-heptane, bromotrichloromethane plus n-heptane, bromotrichloromethane plus dibromomethane, bromotrichloromethane plus bromochloromethane and dibromomethane plus bromochlormethane. Experimental data and modelling
In this paper, the isothermal vapour-liquid equilibrium (VLE) at T = 308.15 K have been measured for liquid binary systems dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + dibromomethane, bromotrichloromethane + bromochloromethane and dibromomethane + bromochloromethane by a dynamic method. The VLE data have been reduced using the Redlich-Kister equation taking into consideration the vapour phase imperfection in terms of 2nd molar virial coefficients and molar excess Gibbs energies, G(m)(E), have been calculated. The experimental G(m)(E), is positive for all systems presenting the greatest value for dibromomethane + n-heptane and a negligible value for dibromomethane + bromochloromethane system. From our experimental data and those reported in the literature, phase and volumetric behaviour of the binary systems containing dibromomethane, bromochloromethane, bromotrichloromethane or n-heptane have been modelled. Two equations of state, EoS, of different formulation have been used obtaining a good agreement for all systems. The mean relative deviations for the studied properties are MRD (P) = 1.57%, AAD (y) = 0.0116 and MRD (rho) = 0.55% for Peng-Robinson EoS, and MRD (P) = 1.20%, AAD (y) = 0.0093 and MRD (rho) = 0.38% for PC-SAFT EoS. (C) 2015 Elsevier B.V. All rights reserved.