An integrative method based on the combination of electrochemical reduction (ECR) and in-situ electrochemiluminescence (ECL) detection was developed for the sensitive detection of the nitroaromatic compounds (NACs), including 4-nitrotoluene (4-NT), 2,4-dinitrotoluene (2,4-DNT), 2,4,6-trinitrotoluene (TNT). An electrochemical flow cell including two working electrodes was fabricated with poly(dimethylsiloxane) (PDMS) to achieve the dual functions. The first one is a copper mesh electrode, acting as the reductor to convert the NACs to aminoaromatic compounds (AACs). Electrochemical deposition of copper nanoparticles on the surface of the copper mesh was conducted to further increase the reduction efficiency. The second one is an ECL electrode, which was used for in-situ detection of the reduced products. The ECL electrode was fabricated by the immobilization of Ru(bpy)(3)(2+) on a glassy carbon electrode (GCE) with the Nafion/the multi-wall carbon nanotubes (MWCNTs) composite film. The copper mesh electrode was arranged directly underneath the ECL electrode to ensure the reduced products could be immediately detected in-situ. An electrolytic solution consists of 33.3 mmol/L Na2SO4 and 16.7 mmol/L phosphate buffer solution (PBS, pH7.0) was found to be optimum for both the electrochemical reduction of the NACs and the ECL detection. The ECL intensities were proportional to the concentrations of 4-NT, 2,4-DNT and TNT in the range from 1.0 x 10 (9) to 1.0 x 10 (5), 3.5 x 10 (9) to 1.0 x 10 (5) and 7.5 x 10 (9) to 1.0 x 10 (5) mol/L respectively. The limit of detections (LOD) were 4.0 x 10 (10), 1.7 x 10 (9) and 3.1 x 10 (9) mol/L respectively for 4-NT, 2,4-DNT and TNT. The reduction mechanism was preliminarily investigated and it was found that the presence of oxygen was critical for the reduction process, suggesting that the reductive oxygen species O-2(center dot-), OH center dot could be involved in the NACs reduction process. (C) 2015 Elsevier Ltd. All rights reserved.