Operated under a cyclic redox mode with an oxygen carrier, the chemical looping with oxygen uncoupling (CLOU) process offers the potential to effectively combust solid fuels while capturing CO2. Development of oxygen carriers capable of reversibly exchanging their active lattice oxygen (O2-) with gaseous oxygen (O-2) under varying external oxygen partial pressure (P-O2) is of key importance to CLOU process performance. This article investigates the effect of A-site dopants on CaMnO3 based oxygen carriers for CLOU. Both Sr and Ba are explored as potential dopants at various concentrations. Phase segregations are observed with the addition of Ba dopant even at relatively low concentrations (5% A-site doping). In contrast, stable solid solutions are formed with Sr dopant at a wide range of doping level. While CaMnO3 perovskite suffers from irreversible change into Ruddlesden-Popper (Ca2MnO4) and spinel (CaMn2O4) phases under cyclic redox conditions, Sr doping is found to effectively stabilize the perovskite structure. In-situ XRD studies indicate that the Sr doped CaMnO3 maintains a stable orthorhombic perovskite structure under an inert environment (tested up to 1200 degrees C). The same oxygen carrier sample exhibited high recyclability over 100 redox cycles at 850 degrees C. Besides being highly recyclable, Sr doped CaMnO3 is found to be capable of releasing its lattice oxygen at a temperature significantly lower than that for CaMnO3, rendering it a potentially effective oxygen carrier for solid fuel combustion and carbon dioxide capture. (C) 2015 Elsevier Ltd. All rights reserved.