화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Journal of Materials Research, Vol.25, No.6, 305-316, June, 2015
DOI10.3740/MRSK.2015.25.6.305  Export Citation
다양한 매체형 분쇄기를 이용한 건식 분쇄공정에서 장비의 표준화를 위한 분쇄실험의 비교 연구
Comparative Study for the Standardization of Grinding Equipment During Dry Grinding Process by Various Grinding Mills
보르암갈란, 사꾸라기시오리, 이재현, 최희규1, †
  • 창원대학교 메카트로닉스 융합부품소재 연구센터(ERC)
  • 1창원대학교 메카융합학과
Amgalan Bor, Shiori Sakuragi, Jehyun Lee, and Heekyu Choi1, †
  • Engineering Research Center(ERC) for Integrated Mechtronics Materials and Components, Changwon National University, Changwon 641-773, Korea
  • 1Department of Metallurgy & Advanced Materials Engineering, Changwon National University, Changwon 641-773, Korea
E-mail:
The study of grinding behavior characteristics on the metal powders has recently gained scientific interest due to their useful applications to enhance advanced nano materials and components. This could significantly improve the property of new mechatronics integrated materials and components. So, a new evaluation method for standardizing grinding equipment and a comparative study for the grinding experiment during the grinding process with various grinding mills were investigated. The series of grinding experiments were carried out by a traditional ball mill, stirred ball mill, and planetary ball mill with various experimental conditions. The relationship between the standardization of equipment and experimental results showed very significant conclusions. Furthermore, the comparative study on the grinding experiment, which investigated changes in particle size, particle morphology, and crystal structure of materials with changes in experimental conditions for grinding equipment, found that the value of particle size distribution is related to the various experimental conditions as a revolution speed of grinding mill and media size.
Keywords:standardization;traditional ball mill;stirred ball mill;planetary ball mill. particle morphology;grinding process
  1. Choi HK, Choi WS, HWAHAK KONGHAK, 40(4), 498 (2002)
  2. Choi H, Wang L, Cheon D, Lee W, Compos. Sci. Technol., 74, 91 (2013)
  3. Neumann AM, Kramer HJM, Part. Part. Syst. Charact., 19(1), 17 (2002)
  4. Andres C, Reginault P, Rochat MH, Chaillot B, Pourcelot Y, Int. J. Pharm., 144(2), 141 (1996)
  5. Choi H, Lee J, Kim S, Choi G, Bae D, Lee S, Lee W, Korean J. Mater. Res., 23(2), 89 (2013)
  6. Allen T, Particle Size Measurement, p.25, Chapman & Hall, New York, (1990).
  7. Wang L, Choi H, Myoung JM, Lee W, Carbon, 47(15), 3427 (2009)
  8. Choi HK, Lee W, Kim DU, Kumar S, Ha JH, Kim SS, Lee JG, Korean J. Chem. Eng., 26(1), 300 (2009)
  9. Choi H, Lee W, Kim S, Jung WS, Kim JH, Mater. Chem. Phys., 117(1), 18 (2009)
  10. Choi H, Wang L, Korean J. Mater. Res., 17(10), 532 (2007)
  11. Kanda Y, Simodaira K, Kotake N, Abe Y, J. Soc. Powder Technol. Jpn., 35(1), 12 (1998)
  12. Kano J, Saito F, Powder Technol., 98(2), 166 (1998)
  13. Kano J, Saeki S, Saito F, Tanjo M, Yamazaki S, Int. J. Miner. Process., 60(2), 91 (2000)
  14. Choi H, Lee W, Kim S, Chung H, Int. J. Appl. Ceram. Technol., 8(5), 1147 (2011)
  15. Masuda H, Higashitani K, Yoshida H, Powder Technology Handbook, 3rd ed., p.213, Taylor & Francis, London, UK (2006).