The paper deals with a possible utilisation of wood ash as a reagent in treating acid mine drainage (AMD) from opencast mining of brown coal. Wood ash samples were obtained having combusted deciduous and coniferous tree wood in a household furnace. The dominant mineral phases in wood ash are calcite, quartz, lime and periclase. The used AMD is characteristic of high contents of sulphates, iron, manganese, heavy metals and low pH. The AMD treatment process included dosing of wood ash to adjust pH values about 8.3 (a dose of 0.5 g l(-1)) or calcium hydroxide (a dose of 0.2 g l(-1)) for comparison. The reaction time was 20 min. Dosing of wood ash in AMD resulted in an increase of pH in solution from 3.5 to 8.3, which caused the removal of metal ions mainly by precipitation, co-precipitation and adsorption. Comparing the application of Ca(OH)(2) in AMD treatment, at an almost identical pH value the concentrations fell in both cases for Fe, Mn, As, Co, Cu, Ni, Zn, Mg, Al and Mo. Applying wood ash the drop was even more distinct in Mn, Zn and Mg. The results of sedimentation tests in an Imhoff cone confirm that the settling capacities of sludge using wood ash are significantly better than when using calcium hydroxide in acid mine drainage treatment. (C) 2013 Elsevier Ltd. All rights reserved.