In this study, coagulation performance of polyaluminum chloride (PAC) and PAC-lignin acrylamide (PAC + LAM) in reservoir water treatment was contrastively analyzed. Effects of operating conditions including chlorine dose, contact time and pH on the formation potential of trihalomethanes (THMs) during chlorination in coagulated effluent were also investigated. Comparing with PAC, PAC + LAM achieved higher efficiency in the removal of THMs precursors. TTHM yield in unfiltered water samples (UW) was greater than that of filtered water (FW) due to the residual dissolved organic matter (DOM) in the suspended particles or micro flocs. Meanwhile, operating conditions during chlorination had a significant influence on THMs formation potential. With chlorine dose rising, mass ratio of CHCl3 to TTHM increased, whereas that of CHBr2Cl decreased due to higher Cl-2/Br- molar ratio. TTHM and CHCl3 levels rose with the increase of pH. Under a given chlorination condition, there was a minor effect of contact time on THM speciation. (C) 2014 Elsevier B.V. All rights reserved.