This study aims to evaluate the NO2 adsorption capacities of activated carbons prepared by physical and chemical activation of date pits and to compare them with modified commercialized activated carbons. The texture, morphology and surface chemistry of the different carbons were evaluated by N-2 and CO2 adsorption, scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), temperature programmed desorption coupled with mass spectroscopy (TPD MS), Fourier transform infrared spectroscopy (FTIR) and X-ray fluorescence (XRF) techniques. The obtained results show that activated carbon prepared from date pits are an efficient adsorbents for the removal of NO2 from the exhaust gases at ambient temperature. The obtained adsorption capacities are close to the ones obtained for the commercialized activated carbons. The analysis of the correlation between NO2 adsorption capacities and the textural and the surface chemistry properties shows that a higher microporosity volume, an homogenous microporosity and the presence of stable oxygen groups contribute strongly to the adsorption of NO2 on the activated carbon surface. In contrast, the presence of strong acidic groups such as carboxylic, anhydrides and lactones inhibits the reduction of NO2 into NO, which represents a crucial step for the NO2 adsorption. (C) 2014 Elsevier B.V. All rights reserved.