Korean Journal of Materials Research, Vol.13, No.4, 224-227, April, 2003
Fe-Cr-C-Si 계 경면처리 합금의 고압ㆍ수중 마모거동
The Sliding Wear behavior of Fe-Cr-C-Si Alloy in Pressurized Water
E-mail:
The sliding wear behavior of a Fe-base hardfacing alloy was investigated in the temperature range of 25∼250 ? C under a contact stress of 15 ksi (103 MPa). The wear loss of this Alloy in pressurized water was less than that of NOREM 02. And galling did not occurred at this alloy in all temperature ranges. It was considered that the wear resistance of this Alloy was attributed to the strain-induced phase transformation from austenite to α 'martensite during sliding wear.
- Antony KC, J. of Metals, 35, 52 (1983)
- Ocken H, Surf. Coat. Technol., 76-77, 456 (1995)
- Phillips MK, Findlan SJ, EPRI Reports TR105816, NOREM Application Guideline (1995) (1995)
- Ohriner EK, Wada T, Ocken H, Metall. Trans., 22A, 983 (1991)
- Vikstrom J, EPRI Reports NP-103845, Galling wear of cobalt-free hardfacing alloys (1994) (1994)
- Kim JK, Kim SJ, Wear, 237, 217 (2000)
- Lee KY, Lee MY, Kim SJ, Korean J. of Mat. Research, 12, 608 (2002)
- Viksrtom J, Wear, 179, 143 (1994)
- Heathcock CJ, Ball A, Protheroe BE, Wear, 74, 11 (1981)
- Abrassart F, Metall. Trans., 4, 2205 (1973)
- Kuhlmann-Wilsdorf D, Wear, 200, 8 (1996)
- Jiang J, Stott FH, Stack MM, Wear, 181-183, 20 (1995)
- So H, Wear, 184, 161 (1995)