화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.21, 717-722, January, 2015
Dry reforming over CeO2-promoted Ni/MgO nano-catalyst: Effect of Ni loading and CH4/CO2 molar ratio
E-mail:
Ceria promoted nickel catalysts supported on nanocrystalline MgO were prepared and employed in methane reforming with carbon dioxide. The prepared catalysts were characterized by XRD, BET, SEM, TPO and TPR techniques. The effect of nickel loading on the catalytic performance of catalysts was investigated and the results showed that 10%Ni-7%CeO2/MgO catalyst possessed the highest catalytic activity. The results also showed that increasing in CO2/CH4 molar ratio decreased the amount of deposited carbon and increased the methane conversion.
  1. Daza CE, Kiennemann A, Moreno S, Molina R, Appl. Catal. A: Gen., 364(1-2), 65 (2009)
  2. Safariamin M, Tidahy LH, Abi-Aad E, Siffert S, Aboukaıs A, Compt. Rendus Chem., 12, 748 (2009)
  3. Beuls A, Swalus C, Jacquemin M, Heyen G, Karelovic A, Ruiz P, Appl. Catal. B: Environ., 113-114, 2 (2012)
  4. Liu C, Chen L, Li J, Ma L, Arandiyan HR, Du Y, Xu J, Hao J, Environ. Eng. Sci., 46, 6182 (2012)
  5. Khalesi A, Arandiyan HR, Parvar M, Chin J. Catal., 29, 960 (2008)
  6. Chen L, Li JH, Ablikim W, Wang J, Chang HZ, Ma L, Xu JY, Ge MF, Arandiyan H, Catal. Lett., 141(12), 1859 (2011)
  7. Daza CE, Moreno S, Molina R, Int. J. Hydrog. Energy, 36(6), 3886 (2011)
  8. Fan MS, Abdullah AZ, Bhatia S, ChemCatChem., 82, 192 (2009)
  9. Hennings U, Reimert R, Appl. Catal. B: Environ., 70(1-4), 498 (2007)
  10. Rostrup-Nielsen JR, Bak Hansen JH, J. Catal., 144, 38 (1993)
  11. Rahmani M, Rezaei F, Meshkani J, Ind. Eng. Chem., http://dx.doi.org/10.1016/j.jiec.2013.07.017 (2013)
  12. Rostrup-Nielsen JR, Catal. Today, 71(3-4), 243 (2002)
  13. Zhuang Q, Qin Y, Chang L, Appl. Catal., 70, 1 (1991)
  14. Li BT, Kado S, Mukainakano Y, Miyazawa T, Miyao T, Naito S, Okumura K, Kunimori K, Tomishige K, J. Catal., 245(1), 144 (2007)
  15. Zhang ZL, Verykios XE, Appl. Catal. A: Gen., 138(1), 109 (1996)
  16. Rezaei M, Alavi SM, Sahebdelfar S, Yan ZF, J. Nat. Gas Chem., 17, 278 (2008)
  17. Climent MJ, Corma A, Iborra S, Mifsud M, J. Catal., 247(2), 223 (2007)
  18. Naito S, Tanaka H, Kado S, Miyao T, Naito S, Okumura K, Kunimori K, Tomishige K, J. Catal., 259(1), 138 (2008)
  19. Xu BQ, Wei JM, Wang HY, Sun KQ, Zhu QM, Catal. Today, 68(1-3), 217 (2001)
  20. Zhang H, Li M, Xiao PF, Liu DL, Zou CJ, Chem. Eng. Technol., 36(10), 1701 (2013)
  21. Gadalla AM, Bower B, Chem. Eng. Sci., 43, 3049 (1988)
  22. Rostrup-Nielsen JR, Catal. Sci. Technol., 5, 1 (1984)
  23. Laosiripojana N, Sutthisripok W, Assabumrungrat S, Chem. Eng. J., 112(1-3), 13 (2005)
  24. Wang SB, Lu GQ, Appl. Catal. B: Environ., 19(3-4), 267 (1998)
  25. Laosiripojana N, Assabumrungrat S, Appl. Catal. B: Environ., 60(1-2), 107 (2005)
  26. Pechimuthu NA, Pant KK, Dhingra SC, Ind. Eng. Chem. Res., 46(6), 1731 (2007)
  27. Baek SC, Bae JW, Cheon JY, Jun KW, Lee KY, Catal. Lett., 141(2), 224 (2011)
  28. Kambolis A, Matralis H, Trovarelli A, Papadopoulou C, Appl. Catal. A: Gen., 377(1-2), 16 (2010)
  29. Daza CE, Gamba OA, Hernandez Y, Centeno MA, Mondragon F, Moreno S, Molina R, Catal. Lett., 141(7), 1037 (2011)
  30. Jwa E, Lee SB, Lee HW, Mok YS, Fuel Process. Technol., 108, 89 (2013)
  31. Dong WS, Roh HS, Liu ZW, Jun KW, Park SE, Bull. Korean Chem. Soc., 22, 1323 (2001)
  32. Andache M, Rezaei M, Moghadam MK, Chin. J. Catal., 34, 1443 (2013)
  33. Nematollahi B, Rezaei M, Khajenoori M, Int. J. Hydrog. Energy, 36(4), 2969 (2011)
  34. Mosayebi Z, Rezaei M, Ravandi AB, Hadian N, Int. J. Hydrog. Energy, 37(2), 1236 (2012)
  35. Koo KY, Roh HS, Seo YT, Seo DJ, Yoon WL, Bin Park S, Appl. Catal. A: Gen., 340(2), 183 (2008)