Korean Journal of Materials Research, Vol.16, No.5, 297-301, May, 2006
리튬 이온 전지용 Si/Mo 다층박막 음극의 전기화학적 특성
Electrochemical Characteristics of Si/Mo Multilayer Anode for Lithium-Ion Batteries
E-mail:
Si/Mo multilayer anode consisting of active/inactive material was prepared using rf/dc magnetron sputtering. Molybdenum acts as a buffer against the volume change of the Silicon. Multilayer deposited on RT (reversible treatment) copper foil current collector to enhance adhesion between Silicon and copper foil. Deposited Silicon was identified as an amorphous. Amorphous has a relatively open structure than crystal structure, thus prevents the lattice expansion and has many diffusion paths of Li ion. When deposited time of Silicon and Molybdenum is 30 second and 2 second respectably, electrode has more capacity and good cycle stability. A 3000 nm thick multilayer was maintained 99% of the initial capacity (1624 ) after 100 cycles. As the increase of the multilayer thickness (4500 nm, 6000 nm), Si/Mo mutilayer anodes show aggravation cycle stability.
- Weppner W, Huggins RA, J. Electrochem. Soc., 124, 1569 (1977)
- Wen CJ, Boukamp BA, Huggins RA, Weppner W, J. Electrochem. Soc., 126, 2258 (1979)
- Wang J, Raistrick ID, Huggins RA, J. Electrochem. Soc., 13, 457 (1986)
- Wen CJ, Huggins RA, J. Electrochem. Soc., 128, 1181 (1981)
- Wen CJ, Huggins RA, J. Solid State Chem., 37, 271 (1981)
- Ohzuku T, Iwakashi Y, Sawai K, J. Electrochem. Soc., 140, 2490 (1993)
- Megahed S, Scrosati B, J. Power Source, 51, 79 (1994)
- Besenhard JO, Yang J, Winter M, J. Power Sources, 68(1), 87 (1997)
- Li H, Huang XJ, Chen LQ, Wu ZQ, Liang Y, Electrochem. Solid-State Lett., 2, 547 (1999)
- Mao O, Turener RL, Courtney IA, Fredericksen BD, Buckett MI, Krause LJ, Dahn JR, Electrocehm. Solid-State Lett., 2, 3 (1999)