화학공학소재연구정보센터
Korean Journal of Materials Research, Vol.16, No.9, 578-583, September, 2006
원료 변화에 따른 Ni-Zn Ferrite의 물리적 특성에 미치는 영향
Effects by Variation of Raw Materials on Physical Properties of Ni-Zn Ferrite
E-mail:
We studied the physical properties of Ni-Zn ferrites by adding different chemicals such as , Cl, and . Specimens were prepared by the coprecipitation method and sintered at temperatures , respectively. X-ray diffractions showed a spinel structure and the optical microscopy revealed grain size of 0.3 to 0.6 . The optimum sintering temperature to obtain fine, sintered microstructure depended on the additive : Cl and . According to particle size analysis, higher magnetic permeability and magnetization value were observed with Cl and . As sintering temperature was raised from to , the average grain diameter, initial permeability and the magnetic moment also increased.
  1. Kim CH, Koh JG, J. of the Kor. Mag. Soc., 7(2), 29 (2002)
  2. Jung GE, Koh JG, J. of the Kor. Mag. Soc., 14(1), 18 (2004)
  3. Koh JG, Song JM, Basic and Application of Magnetic Physics, Soongsil Univ, Press (2005) p,256 (2005)
  4. Taitaro H, Ferrite, Marugen Pub, 47 (1986)
  5. Koh JG, Song JM, Basic and Application of Magnetic Physics, 174 (2005)
  6. Cullity BD, Introduction to Magnetic Materials, Addison-Wesley (1972) p,183 (1972)
  7. Kim TH, Koh JG, J. of the Kor. Mag. Soc., 14(5), 180 (2004)
  8. Fujita T, Kagaya S, Takashima Y, Taguchi M, Shibayama A, Miayzaki T, ICF8. Kyto. Jap., 588 (2001)
  9. ANST/ASTM E-112-77 (1997) (1997)
  10. Koh JG, Kim KU, New Phys., 26(6), 540 (1986)
  11. Kim JG, Han KH, Lee CH, Jeong JY, J. of Kor. Phys. Soc., 38(6), 799 (2001)
  12. Whangbo SW, Jang HK, Kim SG, Cho MH, Jeong KH, Whang CN, J. of Kor. Phys. Soc., 37(4), 457 (2000)
  13. So SJ, Park CB, J. of Kor, Phys. Soc., 38(4), 417 (2001)
  14. Koh JG, Kor. J. of Mat. Res., 12(10), 791 (2002)