화학공학소재연구정보센터
Korean Journal of Materials Research, Vol.18, No.11, 577-582, November, 2008
단결정 초내열합금에서 응고속도에 따른 응고 및 공정조직의 형성 거동
Formation of Solidification and Eutectic Microstructures with Solidification Rates in the Single Crystal Superalloy CMSX 10
E-mail:
Directional solidification experiments were carried out at 1-300 μm/sec solidification rates in the single crystal superalloy, CMSX 10. The solid/liquid interface morphology changed from planar to dendritic, and the dendrite spacing became finer as the solidification rate increased. The pool size of the γ/γ’ eutectic, formed between dendrites, reduced as the solidification rate increased. The phase formation temperatures, such as the solidus, liquidus and eutectic, were estimated by differential scanning calorimetry (DSC) analysis. The morphology of the γ/γ’ phase, known to be eutectic, showed γ' cells with a γ intercellular network, and this γ/γ’ was composed of coarse and fine γ/γ’ regions. In this study, it is suggested that the γ/γ’ phase was a coupled peritectic .The solidification procedure of the γ/γ’ between dendrites is also discussed.
  1. Seth BB, in Superalloys 2000 (Seven Springs, PA, September 2000), eds. Pollock TM et al. (TMS, Warrendale, PA, USA, 2000) p.3. (2000)
  2. Walston WS, O'hara KS, Ross EW, Pollock TM, Murphy WH, in Superalloys 1996 (Seven Springs, PA, September 1996), eds. issinger RD et al. (TMS, Warrendale, PA, USA, 1996) p.27. (1996)
  3. Cetel AD, Duhl DN, in Superalloys 1988 (Seven Springs, PA, September 1988), eds. Duhl DN et al. (TMS, Warrendale, PA, USA, 1988) p.235. (1988)
  4. Pollock TM, Murphy WH, Tueta JS, in Superalloys 1992 (Seven Springs , PA, September 1992), eds. Antolovich SD et al. (TMS, Warrendale, PA, USA, 1992) p.125. (1992)
  5. Versnyder FL, Guard RW, Trans. ASM, 52, 485 (1960)
  6. Erickson GL, J. Metals, 47(4), 36 (1995)
  7. Seo SM, Kim IS, Lee JH, Jo CY, Miyahara H, Ogi K, in Superalloys 2008 (Seven Springs, PA, September 2008), eds. R. Reed et al. (TMS, Warrendale, PA, USA, 2008) p.277. (2008)
  8. D'Souza N, Dong HB, Scripta Mat., 56, 41 (2007)
  9. Brewster G, Dong HB, Green NB, D'Souza N, Met. Mat. Trans. B, 39B, 87 (2008)
  10. Verhoeven JD, Lee JH, Labbs FC, Jones LL, J. Phase Equilibria., 22(1), 15 (1991)
  11. Haines PJ, Thermal Methods of Analysis, p. 79, Blackie Academic and Professional, Glasgow UK, (1995). (1995)
  12. Kermanpur A, Varahram N, Davami P, Rappaz M, Metall. Mater. Trans B, 31B, 1293 (2000)
  13. Kurz W, Fisher DJ, Fundamentals of Solidification, p.83, Trans Tech Publications, Swizerland, (1989). (1989)
  14. McLean M, Directionally Solidification Material for High Temperature Service, p.33, The Metals Society, UK, (1983). (1983)
  15. Eshelman MA, Seetharaman V, Trivedi R, Acta Metall., 36, 1165 (1988)
  16. Verhoeven JD, Fundamentals of Physical Metallurgy, p.267, John Wiley & Sons, New York, (1975). (1975)
  17. Lee JH, Verhoeven JD, J. Crystal Growth, 144, 353 (1994)
  18. Fleming MC, Solidification Processing, p.177, Mc Grow-Hill, New York,(1974). (1974)
  19. Boettinger WJ, Metall. Trans., 5, 2023 (1974)