In this article, a new tool is introduced for the purpose of locating sites in hillside terrain for central receiver solar thermal plants. Provided elevation data at a sufficient resolution, the tool is capable of evaluating the efficiency of a heliostat field at any site location. The tool also locates suitable sites based on efficiency and average annual normal insolation. The field efficiency, or ratio of radiation incident to the receiver to direct normal solar radiation, is maximized as a result of factors including projection losses and interference between heliostats, known respectively as cosine efficiency, shading, and blocking. By iteratively defining the receiver location and evaluating the corresponding site efficiency by sampling elevation data points from within the defined heliostat field boundary, efficiency can be mapped as a function of the receiver location. The case studies presented illustrate the use of the tool for two field configurations, both with ground-level receivers and hillside heliostat layouts. While both configurations provide acceptable efficiencies, results from case studies show that optimal sites for ground-level receivers are ones in which the receiver is at a higher elevation than the heliostat field. This result is intuitive from the perspective of minimizing cosine losses but is nevertheless a novel configuration. (C) 2011 Elsevier Ltd. All rights reserved.