Renewable Energy, Vol.60, 27-33, 2013
Available residual biomass obtained from pruning Morus alba L. trees cultivated in urban forest
Large quantity of residual biomass with possible energy and industrial end can be obtained from management operations of urban forests. The profitability of exploiting these resources is conditioned by the amount of existing biomass within urban community ecosystems. This research was focused on direct and indirect quantification of lignocellulosic waste from urban tree pruning of Morus alba, which is widely deployed as ornamental vegetation in Mediterranean countries. The mean quantity of dried pruned biomass obtained in street and park location was 31.67 kg/tree and 77.78 kg/tree with standard deviation 16.88 kg/tree and 29.51 kg/tree, respectively. Mathematical models for predicting the available amount of pruning residues for this species were developed from easily measurable dendrometric parameters, such as diameter at breast height, crown diameter and total tree height. The best functions were obtained when several variables were combined in quadratics models. R-2 was 0.96 for topping type of pruning practice and street location, and 0.88 in maintenance pruning applied in park areas. Good results were also found when correlating apparent crown volume with kilograms of yielded residues. These models can be used for urban inventories and the application of logistic models. The analysis indicates that an abundant amount of residual biomass originating from pruning operations of ornamental species can be used to achieve ecological and energy targets. (C) 2013 Elsevier Ltd. All rights reserved.