Powder Technology, Vol.255, 120-133, 2014
Modeling and simulation of drying operations in PVC powder production line: Experimental and theoretical study of drying kinetics on particle scale
An experimental method to determine drying kinetic at a particle scale and a pneumatic dryer model are presented. The particle scale kinetics were obtained by immersion of a fixed mass of wet PVC particles (cake) in a batch dense fluidized bed containing inert hot particles (glass bead). It appears clearly that the PVC drying is controlled by a competition between internal and external transfers. The drying kinetic was described by a shrinking core type model and integrated in a one-diniensional steady-state model simulating a pneumatic dryer. A two-phase continuum model was used to describe the steady-state flow of a diluted dispersed phase (wet PVC powder) and a continuous phase (humid air) through dryer. The model takes into account the convective heat, mass and momentum transfers. The numerical results are compared with industrial experimental data. The results show that the inlet temperature is the most important parameter in the operation. (C) 2013 Elsevier B.V. All rights reserved.