An inductively-coupled H2O vapor plasma was used to modify the surface of polycarbonate and polyethylene terephthalate track-etched membranes with the goal of permanently increasing the hydrophilicity of the membrane surfaces. Contact angle measurements on freshly treated and aged samples confirmed the wettability of the membrane surfaces was significantly improved by plasma treatment. X-ray photoelectron spectroscopy and scanning electron microscopy analyses revealed increased oxygen incorporation onto the surface of the membranes, without any damage to the surface or pore structure. Contact angle measurements on a membrane treated in a stacked assembly suggest the plasma effectively modified the entire pore cross section. Plasma treatment also increased water flux through the membranes, with results from plasma modified membranes matching those from commercially available hydrophilic membranes (treated with wetting agent). Mechanisms for the observed modification are discussed in terms of OH and 0 radicals implanting oxygen functionality into the polymers. (C) 2012 Elsevier B.V. All rights reserved.