A cross-linked network is obtained by an end-group cross-linkable PBI (E-PBI) and 4,4'-diglycidyl (3,3',5,5'-tetramethylbiphenyl) epoxy resin (TMBP). The formation of the network is proved by FT-IR and gel fraction test. Then, high temperature proton exchange membranes are constructed by incorporating the cross-linked network into poly(2,2'-(1,3-phenylene)-5,5'-bibenzimidazole) (m-PBI). The influences of the end-group cross-linked network on the properties of membranes are studied, such as, phosphonate acid doping ability, thermal stability, mechanical property, oxidative stability and proton conductivity. The E-PBI/TMBP in the membranes contributes to the improvement of acid doping ability, proton conductivity, mechanical properties and oxidative stabilities. The blend membranes with 20-90 wt% E-PBI/TMBP show higher proton conductivity than pristine PBI at 120 degrees C-180 degrees C. These results indicate that the end-group cross-linked blend membranes are promising materials as high temperature proton exchange membranes. (c) 2012 Elsevier B.V. All rights reserved.