Measurements of flammability and explosion parameters for dust/air mixtures require uniform dispersion of the dust cloud inside the test vessel. In a previous work, we showed that, in the standard 20 L sphere, the dust injection system does not allow generation of a uniform cloud, but rather high gradients of dust concentration are established. In this work, we used a previously validated three-dimensional CFD model to simulate the dust dispersion inside the 20 L sphere at different dust nominal concentrations (and fixed dust diameter). Results of numerical simulations have shown that, as the dust nominal concentration is increased, sedimentation prevails and, thus, when ignition is provided, the dust is mainly concentrated at the vessel walls. (C) 2013 Elsevier Ltd. All rights reserved.