Journal of Hazardous Materials, Vol.264, 313-322, 2014
The effects of various control and water treatment processes on the membrane integrity and toxin fate of cyanobacteria
Cyanobacterial blooms are one of the main contaminants that can degrade drinking water quality with the associated taste, odour and toxic compounds. Although a wide range of techniques have shown promise for cyanobacterial bloom control and cyanobacterial cell/metabolite removal in reservoirs and water treatment plants (WTPs), these treatments may have negative consequences through release of intracellular metabolites into the surrounding water. This study assessed the impact of copper sulphate (CuSO4), chlorine, potassium permanganate (KMnO4), hydrogen peroxide (H2O2) and ozone on Microcystis aeruginosa culture and the toxins it produced. All of these agents induced the loss of cyanobacterial membrane integrity. However, no associated increase in dissolved toxins was detected during chlorine and H2O2 treatments which may be due to faster toxin oxidation rates than release rates. KMnO4 doses of 1 and 3 mg L-1 degraded dissolved toxins while having no impact on cyanobacterial membrane integrity. In contrast, ozone induced a significant increase in extracellular toxins but it was unable to degrade these toxins to the same degree as the other oxidants which may due to the lack of residual. All chemicals, except CuSO4, were able to reduce cyanotoxins and chlorine was the most effective with a rate up to 2161 M-1 s(-1). (C) 2013 Elsevier B.V. All rights reserved.