There are several challenges in producing detector grade material based on Cadmium Zinc Telluride (CZT), which include material synthesis and growth of electrically compensated crystals as well as the extraction of high resistivity material suitable for device applications. One of the challenges towards producing large volumes of compensated material using the Vertical Gradient Freeze (VGF) method is the axial and radial variations in material homogeneity. Growth induced strain is one of the most important factors in the crystal growth of CZT because of the low critically resolved shear stress (CRSS) value for this material. In this work, methods to reduce the thermo-mechanical stress imparted into the crystal have been implemented. Specifically, crystals have been grown under dynamic temperature gradients to minimize the temperature gradient across the ingot, while maintaining relatively higher temperature gradients at the Solid Liquid Interface (SLI). How this adjustment affects bulk resistivity and photoconductivity has been investigated. (C) 2012 Elsevier B.V. All rights reserved.