Solar-grade boron doped silicon has been directionally solidified in a vertical gradient freeze-type furnace equipped with KRISTMAG (R)-heaters to study the influence of travelling magnetic fields (TMFs) on the ingot quality. As-grown silicon ingots of 22 x 22 x 13 cm(3) in volume were cut vertically and analysed. Information was obtained on the curvature of the melt-solid interface, the grain size distribution, the content of SiC and Si3N4 particles and the electrical activity of defects. TMFs were used to enhance melt stirring and to control the growth interface shape. Primarily inclusion-free ingots were solidified with grains of several centimetres in size. Minority carrier lifetimes of tau=20-30 mu s were measured on polished surfaces of cuts from as-grown ingots. The concentrations of carbon, oxygen and nitrogen were determined by FTIR spectroscopy to (3-4) x 10(17) atoms/cm(3), (2-3) x 10(17) atoms/cm(3) and (0.6-2) x 10(15) atoms/cm(3), respectively. Mean etch pit densities were evaluated on vertical cuts as low as (2-3) x 10(3) cm(-2). (C) 2012 Elsevier B.V. All rights reserved.