Ni/Fe bimetallic nanoparticles were synthesized for treatment of Aroclor 1242, in order to evaluate their applicability for in situ remediation of groundwater and soil contaminated by polychlorinated biphenyls (PCBs). Our experimental results indicate that the total PCB concentration changed during the reduction of 3,5-dichlorobiphenyl (PCB 14), and biphenyl was produced as the final product. Initially, the concentration of 3-chlorobiphenyl (PCB 2) was increased in the prophase reaction and then slowly decreased, suggesting that Aroclor 1242 was first adsorbed by Ni/Fe nanoparticles, and then, the higher chlorinated congeners were converted gradually to the lower chlorinated congeners, and finally to biphenyl. The dechlorination efficiency of Aroclor 1242 reached approximately 80% at 25 degrees C in just 5 h, then 95.6% and 95.8% in 10 h and 24 h, respectively. The study revealed that high Ni/Fe nanoparticle dosage and high Ni content in Ni/Fe nanoparticles favor the catalytic dechlorination reaction. Moreover, a comparison of different types of catalysts on the dechlorination of Aroclor 1242 indicated that Ni/Mg and Mg powders showed a greater reactivity than Ni/Fe and Fe nanoparticles, respectively. (c) 2012 Elsevier Inc. All rights reserved.