The synthesis of Stober silica particles as basis for redox modifications is optimized for desired properties, in particular diameter in a wide sub-micrometer range, spherical shape, monodispersity, the absence of porosity, and aggregation free isolability for characterization and later covalent modification. The materials are characterized by SEM. DLS, nitrogen sorption isotherms, helium as well as Gay-Lussac (water) pycnometry, and DRIFT spectroscopy. Particles with diameters between approximately 50 and 800 nm are obtained by varying the concentrations of the reagents and reactants, the type of solvent as well as the temperature. The use of high water concentrations and post-synthetic calcination at 600 degrees C results in silica particles that can be considered as nonporous with respect to the size of the active molecules to be immobilized. The effect of reaction temperature on size distribution is identified. Low polydispersity is achieved by performing the reaction in a temperature range in which a change in temperature has only a weak or no effect on the final particle diameter. Upon optimization of the sol-gel process, the shape of the particles is still spherical. The agreement between experimental and geometric data is within the expected precision of the characterization techniques. (C) 2011 Elsevier Inc. All rights reserved.