Influence of salts (sodium chloride, sodium salicylate and sodium cholate) and nonionic surfactants (Brij-56, TX-100, Span-20, Span-40 and Span-60) on structure and percolation behavior of water/AOT/IPM/propanol (butanol) systems were systematically investigated using conductivity and dynamic light scattering. Percolation behavior had a distinct change with different types of salts and nonionic surfactants. Addition of sodium chloride delayed the conductivity percolation, while sodium salicylate and sodium cholate assisted the percolation. Addition of Brij-56 and TX-100 promoted evidently the conductivity percolation, whereas Spans had little effect. Conductivity behavior was further discussed from the structural properties of nonionic surfactants and salts, and the surfactant packing parameter (P). Droplets sizes were measured using dynamic light scattering to underline the effect of nonionic surfactants on P. Furthermore, ln sigma had a linear correlation with temperature in the range of (278.15 to 313.15) K. No percolation threshold induced by temperature was detected among all the studied systems. Moreover, the activation energy for conductivity was also estimated and discussed according to the Arrhenius-type equation. (C) 2013 Elsevier Ltd. All rights reserved.