By means of the porous plate method and mercury porosimetry intrusion tests, capillary pressure curves of three different sandstones were measured. The testing results have been exploited jointly with three relative permeability models of the pore space capillary type (Burdine's model type), these models are widely used and in rather distinct fields. To do so, capillary pressure has been correlated to saturation degree using six of the most popular relations encountered in the literature. Model predictions were systematically compared to the experimentally measured relative permeabilities presented in the first part of this work. Comparison indicated that the studied models underestimate the water relative permeability and over-estimate that of the non-wetting phase. Moreover, this modeling proves to be unable to locate the significant points that are the limits of fields of saturation where the variation of the relative permeabilities becomes consequent. We also showed that, if pore structure is modeled as a "bundle of capillary tubes", model predications are independent of the capillary pressure curve measuring method. (C) 2002 Elsevier Science Ltd. All rights reserved.