A microfluidic microbial fuel cell utilizing the laminar flow to separate the anolyte and catholyte streams based on graphite electrode is proposed. The co-laminar flow of the two streams inside the microchannel is visualized under different flow rates. The effects of the acetate concentration and flow rate on the cell performance are investigated. The results show that the cell performance initially increases and then decreases with increasing influent COD concentration and the anolyte flow rate. The microfluidic microbial fuel cell produces a peak power density of 618 4 mW/m(2) under the conditions of 1500 mg/L influent COD and an anolyte flow rate of 10 mL/h. The low internal resistance of fuel cell results from elimination of the proton exchange membrane and high surface-to-volume ratio of the microfluidic structure. Moreover, the thickness of biofilm decreases gradually along the flow direction of the microchannel due to the diffusive mixing of the catholyte. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.