A transient, two-dimensional, two-phase, multi-component, non-isothermal model is developed to investigate the start-up and steady-state characteristics of a fully passive, vapor-feed direct methanol fuel cell fed with pure methanol. The model considers the species, heat, charge and electrolyte-dissolved water transport in a single computational domain. During the steady-state operation, methanol loss due to evaporation from the cell to the ambient decreases with an increasing current density. Both the scale analysis and the predictions from the full numerical model reveal that the transient response time depends primarily on the cell load. At high current densities, mass consumption in the anode catalyst layer becomes dominant in the cell transient response time, whereas for the lower current densities, both the diffusive liquid transport in the anode and the mass consumption in the anode catalyst layers are predominant. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.