화학공학소재연구정보센터
International Journal of Hydrogen Energy, Vol.37, No.4, 3251-3260, 2012
Modeling a counter-current moving bed for fuel and steam reactors in the TRCL process
A mathematical model for the moving bed is developed to simulate the fuel and steam reactor in the TRCL (Three-Reactor Chemical-Looping) process. An ideal plug flow of the solid and gas is assumed in modeling the fuel and steam reactor in the TRCL process. The model considered the mass, heat balances, equilibrium, physical properties, such as the heat capacity and viscosity, and kinetics. From this model, the temperature, gas conversion and solid conversion profiles can be predicted for fuel and steam reactors. The oxygen carrier inventory (the mass of the oxygen carrier) in the fuel and steam reactor was calculated with variation of the solid inlet temperature, solid conversion, Fe2O3 content and steam feed rate. The temperature of the oxygen carrier to the reactor was the most sensitive parameter for determining the required inventory of the oxygen carrier. An increase in the solid inlet temperature was predicted to decrease the required inventory of the oxygen carrier. In the steam reactor, a solid inlet temperature increase over 1150 K will cause an increase in the inventory of the oxygen carrier due to the equilibrium conversion. An excessively low or high active material content will require a larger inventory of the oxygen carrier in the fuel reactor. In this study, approximately 20 wt.% of the Fe2O3 content was suitable for reducing the inventory of the oxygen carrier while achieving a solid conversion of 0.9 in the fuel reactor. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
트위터로 공유하기 페이스북으로 공유하기 구글플러스에 공유하기 카카오스토리에 공유하기