The flow phenomenon in the fuel-cell channels is difficult to understand and predict because of the two-phase flow. Proton exchange membrane fuel cells (PEMFCs) with transparent windows are widely used for visualizing the two-phase flow in the channels. In this paper, the visualization of the two-phase flow in the channels was accomplished under various current-density conditions using a transparent cell. The visualization of the single serpentine flow field clearly reveals that anode flooding is more severe than cathode flooding. The main cause for anode flooding is a low gas-flow rate in the channel because of the absence of the carrier gas. In addition, flooding is more significant under a low current-density condition than under a high current-density condition; under the latter condition, there is significantly more reaction heat that prevents flooding. The flow phenomena in the PEMFC stack were also visualized by electrically connecting three transparent cells in series and supplying fuel to each cell from a manifold. Sudden voltage drops and overshoots were detected, and the voltage fluctuations were found to be strongly related to flooding. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.