화학공학소재연구정보센터
International Journal of Hydrogen Energy, Vol.36, No.12, 7284-7290, 2011
Graphene-multi walled carbon nanotube hybrid electrocatalyst support material for direct methanol fuel cell
Nanostructured PtRu and Pt dispersed functionalized graphene-functionalized multi walled carbon nanotubes (PtRu/(f-G-f-MWNT)), (Pt/(f-G-f-MWNT)) nanocomposites have been prepared. Electrochemical studies have been performed for the methanol oxidation using cyclic voltammetry (CV) and chronoamperometry technique. Full cell measurements have been performed using PtRu nanoparticles dispersed on the mixture of functionalized graphene (f-G) and functionalized multi walled carbon nanotubes (f-MWNT) in different ratios as anode electrocatalyst for methanol oxidation and Pt/f-MWNT as cathode catalyst for oxygen reduction reaction in direct methanol fuel cell (DMFC). In addition, full cell measurements have been performed with PtRu/(50 wt% f-MWNT + 50 wt% f-G) and Pt/(50 wt%f-MWNT + 50 wt% f-G) as anode and cathode electrocatalyst respectively. With PtRu/(50 wt%f-MWNT + 50 wt% f-G) as anode electrocatalyst, a high power density of about 40 mW/cm(2) has been obtained, in accordance with cyclic voltammetry studies. Further enhancement in the power density of about 68 mW/cm(2) has been observed with PtRu/(50 wt% f-MWNT + 50 wt% f-G) and Pt/(50 wt% f-MWNT + 50 wt% f-G) as electrocatalyst at anode and cathode respectively. These results have been discussed based on the change in the morphology of the f-G sheets due to the addition of f-MWNT. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.