A compact methanol reformer for hydrogen production has been successfully fabricated, which integrated one reforming chamber, one water gas shift reaction chamber, two preheating chambers and two combustion chambers. It can be started-up at room temperature by the combustion of liquid methanol in the combustion chamber within 7 min without any external heating. The cold start response of the methanol reformer has been investigated using different parameters including methanol and air supply rate, and the experiments revealed that the optimum methanol and air flow rate were 0.55 mL/min and 3 L/min respectively. The results indicated that this methanol reformer can provide a high concentration of hydrogen (more than 73%) and the system efficiency is always maintained above 74%. It is further demonstrated in more than 1600 h continuous performance that the reformer could be operated autothermally and exhibited good test stability. (C) 2010 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.