Pyrolysis of HDPE waste grocery bags followed by distillation resulted in a liquid hydrocarbon mixture with average structure consisting of saturated aliphatic paraffinic hydrogens (96.8%), aliphatic olefinic hydrogens (2.6%) and aromatic hydrogens (0.6%) that corresponded to the boiling range of conventional petroleum diesel fuel (#1 diesel 190-290 degrees C and #2 diesel 290-340 degrees C). Characterization of the liquid hydrocarbon mixture was accomplished with gas chromatography-mass spectroscopy, infrared and nuclear magnetic resonance spectroscopies, size exclusion chromatography, and simulated distillation. No oxygenated species such as carboxylic acids, aldehydes, ethers, ketones, or alcohols were detected. Comparison of the fuel properties to the petrodiesel fuel standards ASTM D975 and EN 590 revealed that the synthetic product was within all specifications after addition of antioxidants with the exception of density (802 kg/m(3)). Notably, the derived cetane number (73.4) and lubricity (198 mu m, 60 degrees C, ASTM D6890) represented significant enhancements over those of conventional petroleum diesel fuel. Other fuel properties included a kinematic viscosity (40 degrees C) of 2.96 mm(2)/s, cloud point of 4.7 degrees C. flash point of 81.5 degrees C, and energy content of 46.16 MJ/kg. In summary, liquid hydrocarbons with appropriate boiling range produced from pyrolysis of waste plastic appear suitable as blend components for conventional petroleum diesel fuel. (C) 2014 Elsevier B.V. All rights reserved.