Three types of SnO2/TiO2 composite nanofibers (homogeneous SnO2/TiO2, heterogeneous SnO2/TiO2 and SnO2 NPs/TiO2) have been prepared via a facile electrospinning method combined with a sol-gel chemistry, whose electrochemical performance as anode materials in lithium-ion battery was evaluated and compared to that of pure TiO2 and SnO(2)electrospunnanofibers (NFs). Rutile phase TiO(2)nanofibers demonstrated an extremely stable but relatively low gravimetric specific capacity of similar to 80 mAh g(-1) when discharged at 100 mAg(-1). In contrast, rutile phase SnO(2)nanofibers showed a much more unstable but higher specific capacity, which dropped from initial 800 to similar to 35 mAh g(-1) after 50 cycles. The incorporation of structurally unstable SnO2 into stable TiO2 matrix can significantly improve both the cycling performance and specific capacity. These composite nanofibers possess a much higher initial gravimetric specific capacity (>500 mAh g(-1)) than rutile phase TiO(2)nanofibers and maintain superior capacity retention to pure SnO2 NFs. The enhanced cycling stability is attributed to the space confinement provided by the structurally stable TiO2, which finding can provide a beneficial guidance for future lithium ion battery electrode development. Published by Elsevier Ltd.