Conversion coatings based on trivalent chromium are more sensitive to the presence of zinc and iron impurities than the chromate formulations. This fact contributes to a decrease in the quality of passivation and to the generation of a significant amount of hazardous liquid waste. Recently, a new eco-innovative process based on Emulsion Pertraction Technology (EFT) is being implemented at industrial scale for selectively removing Zn and Fe from spent passivation baths in order to enhance the lifetime of the Cr (Ill) baths. In this study, the effect of Zn and Fe removal on the electrochemical behaviour of Zn-electroplated steel samples was evaluated by means of polarisation curves and electrochemical impedance spectroscopy measurements at open circuit potential conditions in 3.5 g/L NaCl solutions. The main objective was to assess the benefits brought by EFT using electrochemical methods. Cr (Ill) passivation baths regenerated using the EFT process have been compared to the bath used in a local industry as well as to fresh and spent baths. According to the results, the samples passivated in the EPT regenerated bath showed a significant improvement in their electrochemical behaviour compared to the samples passivated in the spent baths. This study concluded the suitability of EPT for regenerating Cr (Ill) passivation baths. (c) 2014 Elsevier Ltd. All rights reserved.