Partial nitritation (PN) reactors treating complex industrial wastewater can be operated by alternating anoxic-aerobic phases to promote heterotrophic denitrification via NO2-. However, denitrification under stringent conditions can lead to high N2O production. In this study, the suitability of including anoxic phases in a PN-SBR treating real industrial wastewater was assessed in terms of process performance and N2O production. The PN-SBR was operated successfully and, when the HCO3-:NH4+ molar ratio was adjusted, produced a suitable effluent for a subsequent anammox reactor. 10-20% of the total influent nitrogen was removed. N2O production accounted for 3.6% of the NLR and took place mainly during the anoxic phases (60%). Specific denitrification batch tests demonstrated that, despite the availability of biodegradable COD, NO2- denitrification advanced at a faster rate than N2O denitrification, causing high N2O accumulation. Thus, the inclusion of anoxic phases should be avoided in PN reactors treating industrial wastewaters with high nitrogen loads. (c) 2014 Elsevier Ltd. All rights reserved.