Silicon powder reacts with water, liberating hydrogen gas, which poses an explosion risk. Adding metal ions with a high reduction potential suppresses hydrogen generation. Copper (II) ions are particularly effective in this regard. In their presence the reaction features three distinct stages. In the initial phase copper is deposited on the silicon surface concomitant with a rapid drop in the solution pH. Most of the hydrogen evolves during a second active stage with the pH showing a slight upward drift. Finally, in the third stage, the silicon surface passivates and hydrogen evolution comes to a halt. A comparison of this method and two other methods previously reported, i.e., controlled air oxidation of the silicon powder before slurrying and adding organic corrosion inhibitors, shows that silane surface modification of silicon is the most effective method in terms of decreasing the greatest amount of hydrogen released and increasing silicon reactivity in a typical pyrotechnic composition.