화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.38, No.4, 425-433, July, 2014
Export Citation
NR-BR 기반 고무소재에서 폴리부타디엔의 C-C 겔 함량과 물리기계적, 유변학적 특성 사이의 상호관계
Correlation between Physico-Mechanical and Rheological Properties of Rubber Compounds Based on NR-BR with C-C Gel Content in Polybutadiene
Saeed Taghvaei Ganjali, Fereshteh Motiee, and Zohreh Ghazi Tabatabaie†
  • Chemistry Department, I. Azad University, North Tehran Branch, Tehran, Iran
E-mail:
In this study, microstructure and gel content (C-C) of polybutadiene rubber (PBR) were investigated using various techniques including ASTM D 3616, attenuated total reflectance Fourier transform infrared spectrometry (ATR FTIR), differential scanning calorimetry (DSC) and nuclear magnetic resonance spectroscopy (NMR). The ATR FTIR spectra of the samples were investigated to determine the cis, trans, 1, 2-vinyl and the C-C gel content in PBR. The absorbance ratios of specific peaks in different grades of PBR were correlated with the C-C gel content measured by the ATR FTIR techniques. Physico-mechanical and rheological properties of rubber compounds based on BR with various amounts of gel were determined. The results showed that there is an acceptable correlation between these properties and the C-C gel content of PBR.
Keywords:polybutadiene rubber;C-C gel content;ATR FTIR;physico-mechanical and rheological properties;NR/BR blend.
  1. Kuzmain LJ, Rubber Technology, 3rd Edition, Morton M, Editor, Van Nostrand Reinhold, New York (1987)
  2. Mark JE, Polymer Data Handbook, Oxford University Press, New York (1999)
  3. Thiele SKH, Wilson DR, J. Macromol. Sci., Part C: Polym. Rev., 43, 581 (2003)
  4. Proto A, Capacchione C, Stereoselective Polymerization with Single-Site Catalysts, Baugh LA, Canich JAM, Editors, Taylor and Francis, New York (2008)
  5. IUPAC, Compendium of Chemical Terminology, 2nd Edition, Naught ADM, Wilkinson A, Editors, Royal Society of Chemistry, Cambridge, UK (1997)
  6. Cai J, Yu Q, Han Y, Zhang X, Jiang L, Eur. Polym. J., 43, 2866 (2007)
  7. Mitra S, Chattopadhyay S, Bharadwaj YK, Sabharwal S, Bhowmick AK, Radiat. Phys. Chem., 77, 630 (2008)
  8. Pusey PN, Van Megen W, Physica A, 157, 705 (1989)
  9. Ikkai F, Shibayama M, Phys. Rev. E, 56, 51 (1997)
  10. Shibayama M, Macromol. Chem. Phys., 199, 1 (1998)
  11. Shibayama M, Tsujimoto M, Ikkai F, Macromolecules, 33(21), 7868 (2000)
  12. Cohen Y, Ramon O, Kopelman IJ, Mizrahi S, J. Polym. Sci., Part B: Polym. Phys., 30, 1055 (1992)
  13. Kioussis DR, Kofinas P, Polymer, 46(23), 10167 (2005)
  14. Okay O, Prog. Polym. Sci., 25, 711 (2000)
  15. Doi M, Edward SF, The Theory of Polymer Dynamics, Clarendon Press, Oxford (1986)
  16. Nyden M, Soderman O, Karlstrom G, Macromolecules, 32(1), 127 (1999)
  17. Won J, Lodge TP, J. Polym. Sci., Part B: Polym. Phys., 31, 1897 (1993)
  18. Kamiguchi K, Kuroki S, Satoh M, Ando I, Polymer, 46(25), 11470 (2005)
  19. Hossain KMZ, Chowdhury AMS, Haque ME, Dafader NC, Akhtar F, Polym. Plast. Technol. Eng., 49, 136 (2010)
  20. Park BH, Jung IG, Park SS, Polym.(Korea), 25(1), 63 (2001)
  21. Winnik MA, Bystryak SM, Chassenieux C, Strashko V, Macdonald PM, Siddiqui J, Langmuir, 16(10), 4495 (2000)
  22. Mansilla MA, Silva L, Salgueiro W, Marzocca AJ, Somoza A, J. Appl. Polym. Sci., 125(2), 992 (2012)
  23. Yamane Y, Ando I, Buchholz FL, Reinhardt AR, Schlick S, Macromolecules, 37(26), 9841 (2004)
  24. Khaled F, El-Nemr, Mater. Des., 32, 3361 (2011)
  25. Mostafa A, Abouel-Kasem A, Bayoumi MR, El-Sebaie MG, Mater. Des., 30, 791 (2009)
  26. Rouif S, Nucl. Instrum. Meth. B, 236, 68 (2005)
  27. Valentin JL, Rodriguez A, Marcos-Fernandez A, Gonzalez L, J. Appl. Polym. Sci., 96(1), 1 (2005)
  28. Cerid H, Okay O, Eur. Polym. J., 40, 579 (2004)
  29. Mansilla MA, Garraza ALR, Silva L, Salgueiro W, Macchi C, Marzocca AJ, Somoza A, Polym. Test., 32, 686 (2013)
  30. Mitra S, Chattopadhyay S, Sabharwal S, Bhowmick A, Radiat. Phys. Chem., 79, 289 (2010)
  31. Marcilla A, Garcia-Quesada JC, Hernandez J, Ruiz- Femenia R, Perez JM, Polym. Test., 24, 925 (2005)
  32. Kim SM, Kim KJ, Polym.(Korea), 37(3), 269 (2013)
  33. Findik F, Yilmaz R, Koksal T, Mater. Des., 25, 269 (2004)
  34. Shapiro YE, Prog. Polym. Sci., 36, 1184 (2011)
  35. Mitra S, Chattopadhyay S, Bharadwaj YK, Sabharwal S, Bhowmick AK, J. Radiat. Phys. Chem., 77, 630 (2008)
  36. Oh JS, Lee JM, Ahn WS, Polym.(Korea), 33(5), 435 (2009)
  37. Lee YS, Lee WK, Cho SG, Kim I, Ha CS, J. Anal. Appl. Pyrol., 78, 85 (2007)
  38. Tomer NS, Delor-Jestin F, Singh RP, Lacoste J, Polym. Degrad. Stab., 92, 457 (2007)
  39. Celina MC, Giron NH, Rojo MR, Polymer, 53(20), 4461 (2012)
  40. Ziaee F, Mobarakeh HS, Nekoomanesh M, Polym. Degrad. Stab., 94, 1336 (2009)
  41. Chae YK, Kang WY, Jang JH, Choi SS, Polym. Test., 29, 953 (2010)
  42. Ganjali ST, Motiee F, Rubber Chem. Technol., 81, 297 (2008)
  43. Chen FZ, Qian JL, Fuel Process. Technol., 67(1), 53 (2000)
  44. Marcilla A, Garcia-Quesadaa JC, Hernandeza J, Ruiz-Femeniaa R, Perez JM, Polym. Test., 24, 925 (2005)
  45. Ziaee F, Salehi-Mobarakeh H, Nekoomanesh M, Arabi H, E-Polymers, 118 (2008)
  46. Hung NQ, Sanglar C, Grenier-Loustalot MF, Huong PV, Cuong HN, Polym. Degrad. Stab., 96, 1255 (2011)
  47. Taghvaei Ganjali S, Motiee F, Shakeri E, Abbasian A, J. Appl. Chem. Res., 4, 53 (2010)
  48. Rattanasoma N, Poonsuk A, Makmoon T, Polym. Test., 24, 728 (2005)
  49. Aoshuang Y, Zhengtao G, Li L, Ying Z, Peng Z, Radiat. Phys. Chem., 63, 497 (2002)
  50. Sheng X, Lee JK, Kessler MR, Polymer, 50(5), 1264 (2009)