The localized breakdown behavior of AA7055 alloy, and an Al-Zn-Mg alloy having no Cu, with different tempers was studied in 3.5 wt% NaCl solution by an in situ observation system during polarization. Three potentials at which the current increased rapidly were found for AA7055-T6 (peak-aged) samples. The first breakdown potential corresponded to the transient dissolution of an active surface layer formed during surface preparation by abrading with grinding paper. The second potential at which the current increased rapidly was associated with crevice corrosion and was not a true breakdown potential. The second breakdown potential was associated with pitting of the underlying bulk alloy. However, no surface layer attack and a single breakdown potential were observed for AA7055-T73 (over-aged) samples and for the Cu-free Al-Zn-Mg samples in the peak-aged condition. All three samples contained surface layers consisting of nano-grains with the solute-rich bands formed by surface preparation. Both the Zn-rich bands in the surface layer and the Cu content in matrix solid solution of the underlying bulk alloy are responsible for surface layer attack. The change in pitting potential with over-aged tempers could be rationalized based on the Cu content in the matrix. (C) 2013 The Electrochemical Society. All rights reserved.