Recently, many researchers have attempted to convert soybean oil into useful polymers. One of the ways to make soybean oil into a matrix of green composites is to modify its triglyceride structure to obtain the acrylated epoxidized soybean oil (AESO) through epoxidization and acrylation. In this study, the effects of ramie fiber surface treatments such as acetylation, silane, and peroxide treatments on the chemical, morphological, and interfacial adhesion properties of a ramie/AESO green composite were studied. Surface-treated fibers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and dynamic contact angle analysis. The crystallinity and thermal stability of chemically treated fibers were investigated by wide angle X-ray diffraction and thermogravimetric analyzer. It was demonstrated that surface treatments lead to several morphological changes, including the formation of micro-cracks and removal of impurities by acetylation and peroxide treatment as well as surface smoothing by silane treatment. Surface energy of acetylated fiber decreased with treatment time and showed the lowest value for silane treated fiber. The interfacial shear strength (IFSS) of a fiber/AESO composite was investigated through the microbond test. The IFSS of silane treated ramie was higher than that of others. The result indicates that silane treated fibers improve the interfacial property, which is the most important characteristic for the end use of green composites.