화학공학소재연구정보센터
Combustion and Flame, Vol.160, No.10, 2119-2130, 2013
The evolution of soot morphology in a laminar coflow diffusion flame of a surrogate for Jet A-1
An experimental study is performed to investigate the evolution of soot morphology in an atmospheric pressure laminar coflow diffusion flame of a three-component surrogate for Jet A-1. The laser extinction measurement method and the rapid thermocouple insertion technique are used to obtain soot volume fraction profiles and temperature profiles, respectively. Thermophoretic sampling followed by transmission electron microscopy and atomic force microscopy is used to study the morphology of soot particles at different locations inside the flame. Soot formation on the centerline appears to be different from conventional models. Liquid-like particles, which are transparent at the wavelength of 623 nm, are formed and grow up to a volume equivalent diameter of d(p) = 60 nm at temperatures below T = 1500 K. When the temperature exceeds 1500 K, transition of the transparent particles to the mature agglomerated particles happens immediately, i.e. in less than 12 ms. The volume of the liquid-like particles just before the start of their transformation to solid is about five times larger than the volume of mature primary particles. This significant size difference suggests that a large liquid-like particle does not transform into a single primary particle. In addition, multiple dark nuclei are observed in the liquid-like particles prior to carbonization. The significant size discrepancy and the presence of multiple dark nuclei may indicate that primary particle formation and agglomeration on the centerline happen inside the liquid-like particles. In contrast to the centerline, on another streamline with a significantly different temperature history, soot particles form from relatively small liquid-like particles. These particles have the same size as mature primary particles. Carbonization happens early on the streamline. A single dark nucleus grows inside each liquid-like particle and primary particles agglomerate after carbonization is completed. Most of the currently used computational soot models consider a single evolution process for all of the streamlines inside the flame which may not be an accurate assumption. This study shows that soot evolution processes may be different across the flame and are a function of temperature and the concentration of specific species inside the flame. (C) 2013 The Combustion Institute. Published by Elsevier Inc. All rights reserved.