We conducted a high-load operation of a baffled bio-reactor equipped with air-sparged side-stream tubular membrane modules for treating actual municipal wastewater at two different periods (high-and low-temperature). Although nitrogen removal efficiency slightly decreased at the low-temperature period, this baffled bio-reactor showed excellent nitrogen and phosphorus removal efficiencies. We also investigated the developments of both physically reversible and irreversible fouling during operation with two-phase flow (mixed-liquor and gas) at various gas velocities and the mixed-liquor velocity was fixed at 0.50 m/s. The membrane flux was fixed at 80 L/m(2)/hour throughout the experiments. Regardless of the difference in temperature, the trends in the development of these two types of membrane fouling caused by the difference in gas velocity were similar. For physically reversible fouling, an optimum gas velocity, in which the development of this type of fouling was minimized, was found to be around 0.42 m/s (corresponding void fraction was 0.45). A further increase in gas velocity resulted in more reversible fouling. On the other hand, the degree of physically irreversible fouling decreased as gas velocity increased. The results obtained in this study indicated the effect of gas velocity on fouling control differs depending on the type of membrane fouling.