Chromium (Cr) thin films were deposited on float glass using electron beam (e-beam) physical vapor deposition and radio frequency (RF) magnetron sputtering techniques. Surface morphology of these Cr films was studied using atomic force microscopy (AFM). The e-beam deposited Cr films consisted of isolated surface mounds while in RF sputtered samples, these mounds combined to form larger islands. Lower surface adhesive properties were observed for e-beam deposited films, as determined from AFM force-distance curves, presumably due to the nanostructural differences. Similar amounts of adsorbed atmospheric carbonaceous contaminants and water vapor were detected on samples deposited using both methods with e-beam deposited samples having additional carbide species, as determined by X-ray photoelectron spectroscopy data. The dominant crystallographic plane in both e-beam deposited and RF sputtered Cr thin films was (110) of body-centered cubic Cr metal structure as determined from X-ray diffraction data. Weak (211) reflection was also observed in RF sputtered samples and was attributed to a different thin Cr film condensation and growth-mechanism which resulted in nanostructural differences between films deposited using two different methods. (C) 2012 Elsevier B. V. All rights reserved.