Lateral porous anodic alumina (PAA) templates were used to organize carbon nanotubes (CNTs) grown by a hot-filament assisted chemical vapor deposition (HFCVD) process. For the CNT growth, we used a modified "home-made" HFCVD system with two independently powered filaments which are fitted respectively on the methane (CH4) gas line, which serves as a carbon precursor and on the hydrogen (H-2) gas line, which acts as an etching agent for the parasitic amorphous carbon. Various activation powers of the hot filaments were used to directly or indirectly decompose the gas mixtures at relatively low substrate temperatures. A parametric study of the HFCVD process has been carried out for optimizing the confined CNTs growth inside the lateral PAA templates. (C) 2011 Elsevier B.V. All rights reserved.